LIKE NEW FULL DETAIL
INTERIOR PROCESS
Below are the steps that are team will perform to make your interior look like new.
FLOOR MATS
We will begin by removing all floor mats. For plastic floor mats we will use a pressure washer and APC followed by a conditioner. For carpet mats, we will spray with water and APC and scrub with a drill brush, then extract.
HIGH PRESSURE AIR
We will use an air cannon to blow out debris from under seats, door panels, and carpet. This will also agitate the carpet to bring dirt to the surface.
FIRST VACUUM
Once we have agitated the carpets we will vacuum all carpets, crevices, and upholstery. We will remove fine dirt and hair using a drill brush and dog hair brush.
SHAMPOO CARPETS
Once we are done vacuuming we will lightly spray carpets and cloth seats with water. We will then apply carpet cleaner, scrub with a drill brush, and extract the dirty solution.
CLEAN PLASTIC/LEATHER
Once the floors are clean we will scrub all interior plastics, leather, and other hard surfaces with an all-purpose cleaner and detail brush. During this time we will clean the dash, seats, trim, doors, and door jams.
FINE DETAILS & CREVICES
This step it the biggest difference between cleaning and detailing. Our team will use special detailing swabs and picks to clean air vents, cracks, and crevices.
CONDITIONING
This is where the shine comes. Our team will apply a protective conditioner to plastics and leather conditioner to leather surfaces.
CLEAN WINDOWS
Our team will use glass cleaner and a plush microfiber towel to clean all interior and exterior glass.
FRESH SMELL
Once the detail is complete our team will spray an odor eliminator and install a custom Someday Shine air freshener.
EXTERIOR PROCESS
Below are the steps that are team will perform to make your exterior look like new.
Clean Wheels, Tires, and Fenders
• Pressure wash wheels, tires, and fender wells to remove loose dirt and debris.
• Apply Adam’s Wheel & Tire Cleaner and scrub with brushes dedicated for tires, wheels, and fenders.
• Rinse thoroughly.
Clean Engine Bay
• Lightly pressure-wash engine bay.
• Apply Adam’s All Purpose Cleaner to engine components and scrub with a brush.
• Rinse off cleaner.
Remove Iron Contaminants
• Apply Adam’s Iron Remover onto the paintwork, avoiding black plastics.
• Rinse thoroughly.
Wash and Debug
•Apply Adam’s Car Shampoo and Bug Remover onto vehicle.
• Scrub bugs on grill, mirrors, and windshield with a detail brush.
• Rinse off shampoo and bug remover.
Wash and Clay
• Apply Adam’s Wash and Wax across vehicle surface.
• Scrub paint with a wash mitt and then a clay mitt.
• Rinse vehicle thoroughly.
Apply Sealant
• Apply Adam’s H2O Guard & Gloss sealant.
• Wipe with a wet towel first, then a dry towel.
Condition Surfaces
• Apply Adam’s Tire Shine on tires.
• Apply Adam’s Black Trim Restorer on plastics.
• Apply Adam’s Undercarriage Spray in fender wells.
• Apply Adam’s Spray Ceramic Coating in engine bay.
Clean Windows
• Clean windows with Invisible Glass and Extra Soft Plush Towel
INTERIOR CHEMICALS
We use All Purpose Cleaner from Adam’s Polishes to clean a wide range of interior surfaces including plastics, leather, and carpets safely and precisely.
We use Invisible Glass because it works the best at removing fingerprints, smudges, and grime, leaving your glass clean and streak-free.
We use Leather Conditioner from Adam’s Polishes to provide premium protection for your seats, door panels, and any other leather surfaces.
We use Odor Neutralizer from Adam’s Polishes to provide a pleasant and clean scent to your vehicle once the detail is complete.
We use 303 Aerospace Protectant to condition plastic surfaces because it provides a like-new finish and helps protect from UV rays and stains.
EXTERIOR CHEMICALS
We use All Purpose Cleaner from Adam’s Polishes to safely clean, degrease and decontaminate visible dirt and oil from the engine bay.
We use Bug Remover from Adam’s Polishes because it works great at softening and removing bugs from any surface
We use H2O Guard and Gloss from Adam’s Polishes as a drying aid because the water-activated sealant provides lasting protection and high gloss.
We use Undercarriage Spray from Adam’s Polishes to leave a deep, dark finish for plastic fender liners & underbody parts.
We use Iron Remover from Adam’s Polishes to remove stubborn contamination, iron deposits, and metallic fallout from your paint.
We use Car Shampoo from Adam’s Polishes because the thick, luxurious suds, and pH-neutral formula remove dirt before our contact wash.
We use Tire Shine from Adam’s Polishes to give your tires that lustrous deep shine without any of the annoying slinging that comes with other tire shine.
Our final touch on your paint is to use Detail Spray from Adam’s Polishes on any streaks or spots for a streak-free, brilliant finish.
We use Wheel & Tire Cleaner from Adam’s Polishes to break down harsh tire dirt and oxidation and remove built-up brake dust.d
We use Wash & Wax from Adam’s Polishes for our contact wash because the special polymers add a just-waxed, high gloss finish.
We use Black Trim Restorer from Adam’s Polishes to bring back a nice dark color to faded exterior trim pieces. The best part is it lasts several months.
We use Invisible Glass because it works the best at removing fingerprints, smudges, and grime, leaving your glass clean and streak-free.
CONTACT US
Contact us today to schedule an appointment for your vehicle! Whether you need a ceramic coating, paint correction, or interior and exterior detailing, our team at Someday Shine is here to provide top-notch service. With over a decade of experience and the use of high-quality Adam’s Polishes products, we guarantee your satisfaction. Give your car the shine it deserves!
Phone: 720.940.0252
Email: [email protected]
